Safety notices

You can use safety notices to notify contractors of safety violations that were committed by their employees on the job site. These records can be used over time to monitor the safety records of each contractor. A safety notice is documented proof that you notified the contractor, and it may be admissible in court.

The employees of a contractor are not wearing hard hats, so you issue a safety notice that instructs the employees to comply with safety regulations.

  1. On the navigation toolbar, click menu (Navigation).

    2. —Or—

    Open the project home page.

  2. Click Field Management > Safety Notices.

Create a basic record in the Create panel, or create a record with detailed information in the full form.

  • Required fields are marked with an asterisk (*) but aren't enforced for records that use the Draft workflow status.
  • For draft records, you can't edit the Number field. For non-draft records, the field is editable, or it's automatically completed after you sync your data.
  • Duplicate numbers aren't checked until after synchronization. You can edit the number in the iPad record and then sync your data again.
  1. If the right-side panel is closed in the Safety Notices view, click info (Information) on the navigation toolbar.
  2. On the navigation toolbar, click add_circle (Create).
    3. A draft record is saved immediately in the record view.
  3. In the Create panel, enter the record details.
    • To change the workflow status, select an option from the list.
      • Workflow state field
    • To add a location, click the Location field, select a parent or child location, and then click Apply.
    • To add an assignment, click Add in the Assigned To section, select the name, and then set a due date.
    • To add a courtesy copy, click Add in the Courtesy Copies section, and then select the name.
    • In the comments field, enter a comment, click link (Links) to link items, and then click Send icon (Send).
  4. Click save (Save).

    5. You can open the full record to enter additional details, link items to it, and share it with other people.

  1. On the navigation toolbar, click add_circle (Create).
  2. To open the full form, click aspect_ratio (Expand).
  3. In the Subject field at the top-left, enter the subject.
  4. In the Information panel, enter the record details.
    • To change the workflow status, select an option from the list.
      • Workflow state field
    • To add a location, click the Location field, select a parent or child location, and then click Apply.
    • To add an assignment, click Add in the Assigned To section, select the name, and then set a due date.
    • To add a courtesy copy, click Add in the Courtesy Copies section, and then select the name.
  5. In the Subject field, enter the subject of the record.
  6. On the Comments tab, enter a comment, click link (Links) to link items, and then click Send icon (Send).
  7. On the Detailed Information tab, enter more details about the safety violation.
  8. To set who has access to the record, click group , and then select an option.
  9. To link an item to the record, click link (Links), click add (Add), and then select the item type.
  10. To save the changes and keep the record open, click save (Save).

    11. —Or—

    To save the changes and close the record, click arrow_back Done.